Lighting

Fluence Wireless Flex Dimming delivers simplicity, flexibility, and cost savings to your grow operation by replacing dimming cables to each light fixture with wireless control. Wireless Flex Dimming realizes tremendous labor costs savings from reduced installation time, eliminating potential wiring errors. Simply plug a Wireless Flex Dimming Receiver into the dimming port of each Fluence light fixture, install a Wireless Flex Dimming 0-10 V adapter, and connect the 0-10 V dimming control per zone.

Wireless Flex Dimming features qualified Bluetooth mesh technology enabled by SILVAIR that is fully compatible with any 0-10 V dimmer or environmental controllers. Wireless Flex Dimming is easy to configure and enables HPS to LED retrofit growers to add precise dimming control without installing new wiring, maximizing ROI.

Fluence Wireless Flex Dimming delivers simplicity, flexibility, and cost savings to your grow operation by replacing dimming cables to each light fixture with wireless control. Wireless Flex Dimming realizes tremendous labor costs savings from reduced installation time, eliminating potential wiring errors. Simply plug a Wireless Flex Dimming Receiver into the dimming port of each Fluence light fixture, install a Wireless Flex Dimming 0-10 V adapter, and connect the 0-10 V dimming control per zone.

Wireless Flex Dimming features qualified Bluetooth mesh technology enabled by SILVAIR that is fully compatible with any 0-10 V dimmer or environmental controllers. Wireless Flex Dimming is easy to configure and enables HPS to LED retrofit growers to add precise dimming control without installing new wiring, maximizing ROI.

• High light intensity to help produce higher yields.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Foldable 8-rail fixture is a breeze to ship, store, and install.
• Dimmable down to 10% with the Gavita EL3 Master controller (sold separately).
• Delivers the highest efficiency of any full spectrum, Gavita LED fixture at an impressive 3.2 µmol/J.
• Premium diodes.
• Broad Range driver to accommodate a larger voltage range of 208 to 480 V.
• IP66 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Dimensions: 44.1 in x 43.7 in x 3.3 in (112.0 x 111.0 x 8.4 cm).
• Weight: 33.6 pounds (15.24 kilograms).

• Designed as a direct replacement for HID fixtures, with plug-and-play installation for instant LED conversions.
• Wide, even light distribution indiscernible from HPS light throw, with better uniformity.
• Compact design fits most HPS layouts, reducing the pain when replacing hundreds at a time.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Dimmable down to 35% with the Gavita EL3 Master controller (sold separately).
• Delivers 2000 µmol s-1 PAR and an efficient 3.0 µmol/j.
• Premium diodes and drivers.
• Broad Range driver to accommodate a larger voltage range of 208 - 480 V.
• IP65 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Weight: 34.5 pounds (15.65 kilograms).

• 2 LED Clone Bars per package.
• Perfect replacement for T5 fluorescent light fixture.
• 60% more efficient, running off 18 watts.
• Tested in nursery applications.
• Color temperature: 9,000° K.
• Delivers 35 µmol/s at an efficient 2.0 µmol/j.120° wide light distribution.
• 18W per strip (0.15 amps on 120V).
• Daisy chain up to 100 strips on a 20 amp circuit.
• Two strips in array per shelf.
• Easy installation with hanging clip and zip tie slot.
• IP66 wet rated; fully waterproof with water-resistant housing and connectors.
• Rated for 54,000 hours.
• Standard 5-year warranty.
• Mounting hardware and 120 V power cord included.

• Integrated electronic ballast.
• 6,400-degree K lamp included.
• Comes with power cord, jumper cord, and mounting clips (for hanging and flat surfaces).
• Daisy chain up to eight lights per single power cord.
• Reflector utilizes nanotechnology for enhanced reflection.
• 18-inch fixture designed for Super Sprouter Light Track Domes.

• Gavita E-series Interconnect Cables supply controller signals from one ballast to additional ballasts.
• Designed for daisy chain setups with Gavita Master Controllers.
• Available in 2, 5, 8, and 10-foot configurations to suit specific applications.

• Includes the HR96 Reflector for maximum efficiency and uniformity.
• Designed with broad light dispersion in mind.
• Highly efficient passive ballast cooling for longer fixture life.
• Sealed housing with a Gore-Tex® ventilation plug.
• Controllable output up to 1,150 watts.
• Equipped with a dimming knob for manual light output adjustment.
• Features a Repeater Bus interface for control with a Gavita EL Controller (sold separately).
• Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output.
• A single EL controller output can control up to five 100-fixture daisy chains.

• Flexible mounting and easy installation.
• Market-leading efficacies and high-light output per fixture.
• Compact power supply and linear design.
• Powerful and efficient growing all year long.
• PhysioSpec™ Spectra: BROAD R4
• OUTPUT PPF (μmol/s) (400-700nm): 2,290
• OUTPUT PF (μmol/s) (400-800nm): 2,340
• Efficacy (PE) (µmol/J): 2.8
• Efficacy (PE) (µmol/J) @50% Dim: 2.9
• Dimensions (LxWxH): 46.1 x 4.2 x 3.6 in (1,170 x 107 x 91 mm)
• Weight: 11.7 lbs (5.3 kg)
• Input Voltage: 200V to 480V AC
• W AC: 825W
• Pack Type: Bulk pack
•  

• Flexible mounting and easy installation.
• Market-leading efficacies and high-light output per fixture.
• Compact power supply and linear design.
• Powerful and efficient growing all year long.
• PhysioSpec™ Spectra: BROAD R4.
• OUTPUT PPF (μmol/s) (400-700nm): 1,690
• OUTPUT PF (μmol/s) (400-800nm): 1,730
• Efficacy (PE) (µmol/J): 2.7
• Efficacy (PE) (µmol/J) @50% Dim: 2.9
• Dimensions: (LxWxH): 35.5 x 4.2 x 3.6 in (900 x 107 x 91 mm)
• Weight: 8.4 lbs (3.8 kg)
• Input Voltage: 200V to 480V AC.
• W AC: 634W
• Pack Type: Bulk pack.

• Removable light bars for improved installation and maintenance.
• Fully sealed light bars for easier cleaning and greater resistance to the harshest environments.
• 4X4 and 3X4 models for improved racking size options.
• Light Output PPF: Up to 2200 μmol/s
• Efficacy: Up to 3.0 μmol/J
• Wattages: 400w, 680w, 800w
• Lifetimes: Q90 50k hrs
• Voltage Range: 208v-480v