Water Pumps & Irrigation Supplies

Dosatron® Water Hammer Arrestor Kits are used to prevent the potential damaging effects of water hammer, which is defined as a pressure surge or shock wave caused when a fluid in motion is forced to stop or change directions suddenly, often due to a quick-closing valve.

• Automatically collects real-time EC and irrigation volume data from feed and runoff.
• Provides an up-to-the-minute, accurate view of irrigation execution without manual monitoring.
• Tracks volume of water applied, runoff volume, and EC data at both ends.
• Continuously measures both inflow and outflow, unlike manual methods.
• Enables real-time adjustments to irrigation strategy based on root zone conditions.
• Tracks feed EC, substrate EC, and drain EC for a holistic view of nutrient movement.
• Uses real-time runoff data to track field capacity, avoiding imprecise VWC estimates.

• Ideal injector for common liquid fertilizer programs.
• Dilution Range: 1:1000 - 1:100 (0.1% to 1%).
• Ratio Range mL: 3.75 to 37.5 mL.
• Ratio Range tsp: 0.75 to 7.5 tsp.
• Water Flow Range: 0.05 to 14 GPM.
• Operating Pressure Range: 4.3 to 85 PSI.
• Dimensions: 19 1/18″ x 6 5/16″.
• Weight: 6 lbs.
• Connection Size: 3/4″ NPT.
• Maximum Temperature: 104° F.
• Higher flow rates and greater chemical compatibility compared to existing technology.
• Easy installation; can be adapted to new or existing Lo-Flo Nutrient Delivery Systems.
• Extended dosing range achieved by swapping out the injection stem and plunger assembly.

• Compact docking station for connecting two EsyBox systems side by side.
• Fully integrated with in and out pipework connections.
• Easy to dock and undock.
• Ideal for larger flow systems or as a stand-by pump solution.
• Not compatible with the EsyBox Mini.

Highly reliable self priming Horizontal Multistage Pumps. They are low noise with high flow and pressure performances with 2, 3, or 4 impellers for supplying water for domestic and irrigation applications. Built with anticorrosive and rustproof materials. Motors with thermic overload protection. Wear resistant shafts and impellers. Double sealing system between motor and hydraulic part. High resistance to frost and icing. Manual on/off switch.

Highly reliable and powerful submersible multistage pumps produce high flow and pressure performances. Available with 2, 3, or 4 impellers for supplying water for domestic and irrigation applications. Built with anti-corrosive and rust-proof materials. Motors with thermal overload protection. Wear resistant shafts and impellers. Anti-debris stainless steel strainer. This product has excellent cooling of the motor that enables the pump to operate even when it's only partially submerged. Each pump has a 1 in discharge. 16 ft power cord.

Dosatron®'s Water-Powered Nutrient Delivery System Lo-Flo Monitor Kit measures and displays the well-blended outgoing solution providing peace of mind.

Features: Union, close nipples, nipples, tee, pressure gauge, pressure gauge tee, cross, check valve, fittings, ball valves, hose adapter, monitor, probe holder assembly, and seal thread tape.

• Maintains consistent water pressure across multiple rooms or installations.
• Compact design—about 30% smaller than traditional systems.
• Whisper-quiet operation at 45 dB.
• Energy-efficient, only using power needed for pressure and flow.
• Flexible installation—can be mounted horizontally or vertically.
• Integrated wireless system for easy monitoring across multiple units.
• EsyBox Mini moves approximately 22 gallons (83 liters) per minute.

• The best pump for mixing nutrients.
• Dilution Range: 1:3000 to 1:333 (0.03% to 0.3%).
• Ratio Range mL: 1.25 to 11 mL.
• Ratio Range tsp: 0.25 to 2.25 tsp.
• Water Flow Range: 0.05 to 14 GPM.
• Operating Pressure Range: 4.3 to 85 PSI.
• Dimensions: 21″ x 6 5/16″.
• Weight: 6 lbs.
• Connection Size: 3/4″ NPT.
• Maximum Temperature: 104°F (40°C).
• Includes a union for easy installation into the Nutrient Delivery System.

• The best pump for mixing nutrients.
• Dilution Range: 1:3000 to 1:333 (0.03% to 0.3%).
• Ratio Range mL: 1.25 to 11 mL.
• Ratio Range tsp: 0.25 to 2.25 tsp.
• Water Flow Range: 0.05 to 14 GPM.
• Operating Pressure Range: 4.3 to 85 PSI.
• Dimensions: 21″ x 6 5/16″.
• Weight: 6 lbs.
• Connection Size: 3/4″ NPT.
• Maximum Temperature: 104° F.
• Includes a union for easy installation into the Nutrient Delivery System.

• Dilution Range: 1:100 to 1:10 (1% to 10%).
• Injection Range mL: 37.5 to 375 mL/gal.
• Injection Range tsp: 7.5 to 75 tsp/gal.
• Water Flow Range: 0.05 to 14 GPM.
• Operating Pressure Range: 7 to 85 PSI.
• Available Housing Materials: Polypropylene.
• Dimensions: 19 1/18 x 6 5/16 in (48.40 cm x 16.03 cm).
• Weight: 6 lbs (2.72 kg).
• Connection Size: 3/4 in NPT.
• Maximum Temperature: 104°F (40°C).

Highly reliable electronic booster sets for supplying water for domestic applications. Equipped with an electronic safety device that protects the pump from dry-running. Built-in non return valve. Designed to automatically start and stop the pump when taps are open or closed. Automatic and manual reset. These type of pumps give a constant pressure and flow rate so they are excellent for irrigation systems. Anticorrosive and rustproof materials. Motor with thermic overload protection.

• High flow nutrient dosing pump.
• Dilution Range: 1:500 - 1:50 (0.2 to 2%).
• Ratio Range mL: 7.5 to 75 mL.
• Ratio Range tsp: 1.5 to 15 tsp.
• Water Flow Range: 2.2 to 40 GPM.
• Operating Pressure Range: 4.3 to 116 PSI.
• Dimensions: 25 1/4″ x 8 1/2″.
• Weight: 12 lbs.
• Connection Size: 1 1/2″ NPT.
• Maximum Temperature: 104°F (40°C).
• 63% fewer parts, metal free piston.
• Can be installed in parallel to increase the water flow.
• Includes a union for easy installation into the Nutrient Delivery System.

Dosatron Water-Powered Nutrient Delivery System Hi-Flo Monitor Kit measures and displays the well-blended outgoing solution providing peace of mind.

Includes: unions, close nipples, mixing chamber, nipples, tees, pressure gauge, cross, ball valves, hose adapter, monitor, probe holder assembly, seal thread tape.

• Engineered specifically for indoor home grows with an average of 4 to 24 lights or 12 to 96 plants.
• Flow Rates: 0.5 to 5 GPM (1.89 to 18.9 LPM)
• Pressure Range: 35 – 87 psi (2.5 - 6 BAR)
• Connection Size: ¾ inch inlet / outlet
• Dosing Range %: 0.05 - 0.5
• Dosing Range mL/gallon: 1.875 - 18.75 mL/G
• Dosing Range Ratio: 1:2000 to 1:200
• Maximum Temperature: 104 F (40 C)
• System Weight: 14.5 lb (6.585 kg)
• Spare Unit Weight: 2.5 lb (1.15 kg)
• Assembled System Dimensions: 11.81 L x 12.4 W x 17.72 H in (L 300 x l 315 x H 450 mm)
• Max Dosing Unit Dimensions: 6.3 L x 5.26 W x 13.58 H in (L 160 x l 133.5 x H 345 mm)
• Included Accessories: Mounting bracket, suction hose, weighted strainer, union connections and quick start guide.

• Ideal injector for common liquid fertilizer programs.
• Dilution Range: 1:1000 - 1:100 (0.1% to 1%).
• Water Flow Range: 2.2 to 40 GPM.
• Operating Pressure Range: 4.3 to 116 PSI.
• Dimensions: 125 1/4″ x 8 1/2″.
• Weight: 6 lbs.
• Connection Size: 1.5″ NPT.
• Maximum Temperature: 104°F.
• Higher flow rates and greater chemical compatibility compared to existing technology.
• Easy installation; can be adapted to new or existing Hi-Flo Nutrient Delivery Systems.
• Extended dosing range achieved by swapping out the injection stem and plunger assembly.

• Low-flow water-powered pumps.
• Available in a range of models with tailored dilution ranges.
• Ideal for nutrient and pH dosing in hydroponic applications.
• Consistent and precise injection without electricity.
• Two seal options for acidic vs. alkaline additives.
• Easy to integrate into existing irrigation systems.

• High flow hydroponic pump.
• Dilution Range: 1:3000 to 1:500 (0.03% to 0.2%).
• Ratio Range mL: 1.25 to 7.5 mL.
• Ratio Range tsp: 0.25 to 1.5 tsp.
• Water Flow Range: 2.2 to 40 GPM.
• Operating Pressure Range: 4.3 to 116 PSI.
• Dimensions: 25 1/4″ x 8 1/2″.
• Weight: 12 lbs.
• Connection Size: 1 1/2″ NPT.
• Maximum Temperature: 104°F (40°C).
• 63% fewer parts, metal free piston.
• Can be installed in parallel to increase the water flow.
• Includes a union for easy installation into the Nutrient Delivery System.

• High flow hydroponic pump.
• Dilution Range: 1:3000 to 1:500 (0.03% to 0.2%).
• Ratio Range mL: 1.25 to 7.5 mL.
• Ratio Range tsp: 0.25 to 1.5 tsp.
• Water Flow Range: 2.2 to 40 GPM.
• Operating Pressure Range: 4.3 to 116 PSI.
• Dimensions: 25 1/4″ x 8 1/2″.
• Weight: 12 lbs.
• Connection Size: 1 1/2″ NPT.
• Maximum Temperature: 104° F.
• Can be installed in parallel to increase the water flow.
• 63% fewer parts, metal free piston.
• Includes a union for easy installation into the Nutrient Delivery System.

• High flow hydroponic pump.
• Dilution Range: 1:100 to 1:20 (1% to 5%).
• Ratio Range mL: 37.5 to 190 mL.
• Ratio Range tsp: 7.5 to 38 tsp.
• Water Flow Range: 2.2 to 40 GPM.
• Operating Pressure Range: 7.2 to 116 PSI.
• Dimensions: 25 1/4″ x 8 1/2″.
• Weight: 12 lbs.
• Connection Size: 1 1/2″ NPT.
• Maximum Temperature: 104° F.
• Can be installed in parallel to increase the water flow.
• 63% fewer parts, metal free piston.
• Includes a union for easy installation into the Nutrient Delivery System.

• Maintains consistent water pressure across multiple rooms or installations.
• Compact design—about 30% smaller than traditional systems.
• Whisper-quiet operation at 45 dB.
• Energy-efficient, only using power needed for pressure and flow.
• Flexible installation—can be mounted horizontally or vertically.
• Integrated wireless system for easy monitoring across multiple units.
• EsyBox moves approximately 32 gallons (121 liters) per minute.
• EsyBox Mini moves approximately 22 gallons (83 liters) per minute.