Water Pumps & Irrigation Supplies

• Netafim™ 17 mm Shut-Off Valve
  • Dual 17 mm barbed tubing connectors designed for 17 mm UV Poly Tubing (#Q102449).
  • Can be used as a flush valve or to shut off a table.
• Netafim™ 17 mm Techline Combination Tee
  • Dual 17 mm barbed tubing connectors designed for 17 mm UV Poly Tubing (#Q102449).
  • Connects to 1/2 inch female pipe thread.
  • Use with the Netafim Liquid Filled Pressure Gauge (#Q102475) to measure water pressure on the table.

• Instantly responds to pressure variations to maintain a constant 35 PSI outlet pressure.
• Non-corrosive, high-quality plastic bodies withstand commonly used fertilizers and chemicals.
• Sealed regulating unit with a stainless steel spring and screw for easy maintenance and replacement.
• Maximum Operating Pressure: 145 PSI.

• Low-flow water-powered pumps.
• Available in a range of models with tailored dilution ranges.
• Ideal for nutrient and pH dosing in hydroponic applications.
• Consistent and precise injection without electricity.
• Two seal options for acidic vs. alkaline additives.
• Easy to integrate into existing irrigation systems.

• Installs directly where needed for precise irrigation.
• Reduces setup time considerably.
• Features a 0.3 or 0.5 GPH pressure-compensating emitter with CNL check valve.
• Includes 18, 30, 36, or 48 in (46, 76, 91, or 122 cm) of Super Flex Tubing.
• Comes with an angled barbed stake for secure placement.
• Requires a minimum operating pressure of 10 psi.

• Excellent ultra-violet (UV) resistance.
• Reflective and completely opaque to prevent algae growth.
• Withstands heat, direct sun and harsh chemicals.
• Produces cooler water temperatures enhancing plant growth.

• 1.74 psi internal check valve prevents low emitter drainage, holding back up to a 3.9-foot column of water.
• Reduces the risk of contaminants being drawn into the emitter.
• Pressure compensating design ensures consistent flow from 10.15 to 58 psi.
• Exclusive TurboNet® flow path for regulated flow and continuous self-cleaning action.
• Sharp barb allows for easy installation with no tools required.

Dosatron® Water Hammer Arrestor Kits are used to prevent the potential damaging effects of water hammer, which is defined as a pressure surge or shock wave caused when a fluid in motion is forced to stop or change directions suddenly, often due to a quick-closing valve.

• Installs directly where needed for precise irrigation.
• Reduces setup time considerably.
• Features a 0.3 GPH pressure-compensating emitter with CNL check valve.
• Includes 18 inches (46 cm) of Super Flex Tubing.
• Comes with an angled barbed stake for secure placement.
• Requires a minimum operating pressure of 10 psi.

• Excellent ultra-violet (UV) resistance.
• Reflective and completely opaque to prevent algae growth.
• Withstands heat, direct sun and harsh chemicals.
• Produces cooler water temperatures enhancing plant growth.
• 17 millimeter polyethylene tubing (0.560 in ID x 0.660 in OD).
• 250 feet (76 meters).

• Installs directly where needed for precise irrigation.
• Reduces setup time considerably.
• Features a 0.5 GPH pressure-compensating emitter with CNL check valve.
• Includes 18 inches (46 cm) of Super Flex Tubing.
• Comes with an angled barbed stake for secure placement.
• Requires a minimum operating pressure of 10 psi.

• Installs directly where needed for precise irrigation.
• Reduces setup time considerably.
• Features a 0.3 GPH pressure-compensating emitter with CNL check valve.
• Includes 30 inches (76 cm) of Super Flex Tubing.
• Comes with an angled barbed stake for secure placement.
• Requires a minimum operating pressure of 10 psi.

Wound polypropylene cartridge with rated filtering capacity of 20 microns. Particularly suitable to remove suspended particles such as sand. Suitable for installation at the entrance of pumps, industrial refrigerators, and softeners.

• Installs directly where needed for precise irrigation.
• Reduces setup time considerably.
• Features a 0.5 GPH pressure-compensating emitter with CNL check valve.
• Includes 30 inches (76 cm) of Super Flex Tubing.
• Comes with an angled barbed stake for secure placement.
• Requires a minimum operating pressure of 10 psi.

• TurboNet labyrinth with large water passage ensures reliable performance.
• CNL check valve prevents drainage and maintains consistent flow.
• Pressure compensating for uniform water delivery with varying pressure.
• UV-resistant and withstands exposure to standard fertilizers.
• Minimum operating pressure of 10 PSI.

• Netafim 4-Way Dripper Stake Assemblies simplify installation.
• Includes 4-way fitting and angled barbed stakes, preassembled for convenience.
• 36-inch (91.4 cm) lengths of Super Flex UV-protected PE tubing.

• Netafim 4-Way Dripper Stake Assemblies simplify installation.
• Includes 4-way fitting and angled barbed stakes, preassembled for convenience.
• 48-inch (122 cm) lengths of Super Flex UV-protected PE tubing.

Mini maintenance kit for the Dosatron® D14MZ10, D14MZ10-HY, and D14TMZ10 - 14 GPM.

Includes:

• Plunger seal.
• Top guide.
• Check valve cone.
• Check valve spring.
• Check valve cone o-ring.
• Dosa-Lube (Silicone).

• Pressure-compensating device.
• Delivers water to multiple locations.
• Features a 1/2-inch FPT inlet and 8 swivel-port 3/16-inch outlets.
• Includes built-in backflow prevention for added protection.
• Optional port plugs available for unused ports.
• Flow rate: 10 GPH.
• Pressure compensation range: 20–60 PSI.
• Constructed using durable ABS plastic.

• Pressure-compensating device.
• Delivers water to multiple locations.
• Features a 1/2-inch FPT inlet and 8 swivel-port 3/16-inch outlets.
• Includes built-in backflow prevention for added protection.
• Optional port plugs available for unused ports.
• Flow rate: 6 GPH.
• Pressure compensation range: 20–60 PSI.
• Constructed using durable ABS plastic.

Hydro Flow® single grip hose clamps provide a superior seal on hose or tubing. As interlocking teeth are pushed together the sealing diameter closes evenly creating a uniform clamping surface. These clamps can be removed by separating the clamping halves in a perpendicular direction at the seal. The black nylon clamps won't corrode or rust and installation and removal requires no tools.

Hydro Flow® single grip hose clamps provide a superior seal on hose or tubing. As interlocking teeth are pushed together the sealing diameter closes evenly creating a uniform clamping surface. These clamps can be removed by separating the clamping halves in a perpendicular direction at the seal. The black nylon clamps won't corrode or rust and installation and removal requires no tools.

Choose from the 4 sizes of Hydro Flow® Grommets to fit your needs. Packaged in large amounts so you can sell individually.